SuperBike Magazine

 

Aprilia RSV4 specs released

RSS Feed
What is this?

October 7, 2008 - Al

Full specs on the new 2009 Aprilia RSV4 ... Scroll down for the full story

Aprilia's sent us the specs on its new RSV4. So here they are.
Highlights? Well 180bhp is good news, as is a dry weight of 179kg. We can't wait to ride it!

You'll also notice it's not '25kg lighter than a Fireblade' as claimed by the muppeteers at MCN...

APRILIA RSV4 FACTORY
Technical Specifications

Engine Aprilia 65° cc longitudinal V-four four stroke. Liquid cooled. Double overhead camshaft; four valves per cylinder.

Bore and stroke 78 x 52.3 mm.

Displacement 998.9cc

Compression ratio 12.8:1

Max. power at crank 180 HP (132 kW) at 12,500 rpm

Max. torque at crank 115 Nm at 10,000 rpm

Fuel system Variable height intake trumpets. Airbox with aerodynamic side intakes. 4 throttle bodes, 8 injectors, ride-by-wire fuel management. Multimapping

Ignition Electronic digital ignition integrated in the fuel management system.

Exhaust 4 into 2 into 1. Lambda probe oxygen sensor. Single lateral silencer. Integrated exhaust valve and catalytic converter. (Euro 3.)

Lubrication Wet sump. Two pumps (lubrication and cooling). Oil cooler.

Gearbox 6 speed cassette type.

Clutch Multi-plate wet clutch with slipper device.

Frame Twin beam aluminium frame with mixed cast and pressed sheet sections. Adjustments for: headstock position and angle, engine height, swingarm pivot height.

Front suspension Öhlins 43 mm upside-down fork. Lower fork bottoms for radial calipers. Adjustment for preload, compression and rebound.

Rear suspension Double arch aluminium swingarm; mixed thin-wall casting and pressed sheet construction. Öhlins monoshock with piggy-back cylinder. Adjustments for compression, rebound, spring preload and length. APS rising rate linkages.

Front brake Double 320 mm lightweight stainless steel floating discs. Brembo monobloc radial calipers with 4 opposed pistons. Sintered pads. Radial master cylinder. Metal braided brake line.

Rear brake 220 mm disc. Brembo floating caliper with 2 insulated pistons. Sintered pads. Master cylinder with integral reservoir. Metal braided brake line.

Wheels Forged aluminium alloy. Front: 3.5”x17” - Rear: 6”x17”.

Tyres Radial tubeless; 120/70 ZR 17 (front) and 190/55 ZR 17 (rear).

Overall length: 2,050 mm

Overall width: 715 mm (at handlebars)

Overall height: 1,165 mm

Wheelbase: 1,424 mm

Dry weight 179 Kg.

Fuel tank 17 litres.



Back to index

Subscribe to Superbike Magazine

What is SuperBike?
SuperBike is an irreverent, humorous and massively informative magazine for all kinds of bikers. The staff has decades of testing and riding experience and are all still passionate about bikes. Biking is – or should be – great fun as well as a huge thrill.